Datalogic QuickScan I QM21X1, Product Reference Manual

Page: 89 / 362

Reading Parameters Enter/Exit Programming Mode
Product Reference Guide 79
Good Read LED Duration
This feature specifies the amount of time that the Good Read LED remains on
following a good read. The good read LED on time can be set within a range of
0.1 to 25.5 seconds in 100ms increments. See "Good Read LED Duration" on
page 298 for more detailed programming instructions.
$CLAGL
Select Good Read LED Duration Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
03 = Good Read LED stays on for 0.3
seconds.
NOTE
Indicators are dimmed during sleep.