Datalogic QuickScan I QD21 1 Series, Product Reference Manual

Page: 212 / 360

Enter/Exit Programming Mode Standard 2 of 5
202 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
Standard 2 of 5 Check Character Transmission
This feature enables/disables transmission of an optional Standard 2 of 5 check
character.
Standard 2 of 5 Check Character Transmission = Don’t Send
Standard 2 of 5 Check Character Transmission = Send
Standard 2 of 5 Minimum Reads
This feature specifies the minimum number of consecutive times a Standard 2
of 5 label must be decoded before it is accepted as good read.
Standard 2 of 5 Minimum Reads = 1
Standard 2 of 5 Minimum Reads = 2
Standard 2 of 5 Minimum Reads = 3
Standard 2 of 5 Minimum Reads = 4
$CS2CT00 
$CS2CT01 
DEFAULT
$CS2MR01 
$CS2MR02 
$CS2MR03 
$CS2MR04 
DEFAULT