Datalogic QBT2101-BK-BTK+, Product Reference Manual, Page: 43 / 360

RS-232 ONLY Interface Enter/Exit Programming Mode
Product Reference Guide 33
Parity
This feature specifies parity required for sending and receiving data. A parity
check bit is the most significant bit of each ASCII coded character. Select the
parity type according to host device requirements.
• Select None when no parity bit is required.
• Select Odd parity and the parity bit value is set to 0 or 1, based on data, to
ensure that an odd number of 1 bits are contained in the coded character.
• Select Even parity and the parity bit value is set to 0 or 1, based on data, to
ensure that an even number of 1 bits are contained in the coded character.
Parity = None
Parity = Even
Parity = Odd
$CR2PA00 
$CR2PA01 
$CR2PA02 
DEFAULT