Datalogic PowerScan Series, Product Reference Manual

Page: 290 / 411

ENTER/EXIT PROGRAMMING MODE DISPLAY AND KEYBOARD FEATURES
274
POWERSCAN™ PD/PM/PBT9600
Set String ID
Sets the identifier of the predefined strings.
Set String Header
Sets the header of the predefined strings.
Set String ID
$CPWEB
To configure this feature, scan the ENTER/EXIT PRO -
GRAMMING MODE bar code above, then scan the bar
code at left and then read 6 digits representing 3
ASCII characters from the Appendix G, Keypad .
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL

0x00000000000000000000000000000000
Set String Header
$CPWED
To configure this feature, scan the ENTER/EXIT PRO -
GRAMMING MODE bar code above, then the bar code
at left, and then read 32 digits representing 16 ASCII
characters in Appendix G, Keypad .
The digits must be the hexadecimal ASCII represen -
tation of the desired characters. If less than the
expected string of 16 characters are selected, scan
the ENTER/EXIT bar code to terminate the string.
If the first 2 digits are 0, the feature is disabled. End
by scanning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL

0x00000000000000000000000000000000