CHARGING THE BATTERIES
PRODUCT REFERENCE GUIDE
13
The field of view indicated by the aiming system will be smaller when the reader is
closer to the bar code and larger when it is farther from the code. Symbologies with
smaller elements (mil size) should be read closer to the unit. Symbologies with larger
elements (mil size) should be read farther from the unit. Successful reading is signaled
by an audible tone plus a good-read green spot LED indicator and vibration.
CHARGING THE BATTERIES
Once the BC9600 is powered, you can charge the reader's batteries. Place the Power
-
Scan™ PM/PBT9600 into the BC9600 base station. The LEDs on the base station/battery
charger turn green and flash orange/green when recharging begins.
The battery is completely charged when the Reader LED on the base station/battery
charger turns green.
The battery can also be charged using the Multi Battery Charger accessory.
PM/PBT9600-DC
MODEL P/N
AIMER PATTERN
The Battery Status information can be easily retrieved
by double tapping with your fingers on top of the head
of the scanner
NOTE: The PowerScan PM/PBT9600 may get warm during charging: this is
normal and does not mean a malfunction.
NOTE: Before using the battery, read "Battery Safety"
. Datalogic
recommends annual replacement of rechargeable battery packs to ensure
maximum performance.
