ARROW KEYS MODE (4-KEY MODELS ONLY)
ENTER/EXIT PROGRAMMING MODE
PRODUCT REFERENCE GUIDE
253
Arrow Keys Mode (4-key models only)
Configure the Arrow Keys functionality type. Two options are available:
Function Keys Action Select mode:
When in this mode, arrow keys are used to select
one of the 3 possible actions associated to the Function Keys. To associate actions to the
Configure Actions for Function Keys, starting on page 256
String Association Mode:
When in this mode, each one of the arrow keys can be pro
-
grammed to display and transmit a pre-defined string.
Arrow Up String (4-key models only)
Associate a pre-defined string to the Arrow Up key
$CDIAC00
SHIFT Mode
STRING Mode
$CDIAC01
Set string for Arrow Up Key
$CDAUS
To configure this feature, scan the ENTER/EXIT PRO
-
GRAMMING MODE bar code above, then the bar code
at left. Define the label string by further scanning 32
digits from the Alphanumeric characters in
.
The digits must be the hexadecimal ASCII represen
-
tation of the desired characters; if less than the
expected string of 16 characters are selected, scan
the ENTER/EXIT bar code to terminate the string.
End by scanning the ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
CANCEL
0x3D000000000000000000000000000000
