PowerScan™ PM8300-DK Configuration
10
PowerScan™ PM8300-DK 16-Key Reader
PowerScan
™
PM8300-DK/BC-80X0 Stand Alone Setup
When the BC-80X0 cradle is connected and powered, configure the PowerScan
™
PM8300-DK by reading the following codes in the given sequence and follow the
instructions..
NOTE
For the numeric code selection of steps 3, 4, and 5 use the table
at the end of this Quick Reference manual.
1.
Restore PowerScan
™
PM8300-DK Default
Ì$+$*oÎ
2.
Enter Configuration
Ì$+;Î
3.
Set Date
ÌIA%Î
+
six digits for Day, Month and Year (DDMMYY).
4.
Set Time
ÌIB'Î
+
four digits for Hours and Minutes (HHMM).
5.
Set Radio Address
ÌRA0RFHÎ
+
four digits for the PowerScan
™
PM8300-DK Address
(from 0000 to 1999).
All readers used in the same area must have different addresses.
