Linking the Reader
10
PowerScan™ PBT9500-HP-E
Linking to a Bluetooth Adapter in HID mode
1.
Install any drivers provided with the Bluetooth
adapter.
2.
Scan the
Link to PC in HID
label below..
3.
Use the host computer’s Bluetooth manager to
“Discover new devices” and select "Datalogic
Scanner." If you receive an error message, it may
be necessary to disable security on the device.
4.
Use a text editor to see incoming data on the
port designated by the computer's Bluetooth
manager..
The Powerscan PBT9500-HP-E can be set up to
require a PIN code when connecting. If you
want to set up a PIN, or when adding new
equipment to a system that uses a custom
security PIN, please see the PRG for informa-
tion.
Link to PC in HID
