Set Date and Time
8
PowerScan™ PBT9500-HP-E
to reset the reader to initial configuration. See the PRG for
other options, and a listing of standard factory settings.
Set Date and Time
1.
Scan the Enter/Exit Programming barcode
below to set date and time.
ENTER/EXIT PROGRAMMING MODE
2.
Scan the Set Date b six digits for Year,
Month and Day (YYMMDD) from the
Set Date
3.
Scan Set Time + six digits for Hours, Minutes and
Seconds (HHMMSS) from the
.
Set Time
4.
Scan the Enter/Exit Programming barcode to
complete.
Factory defaults are based on the interface
type. Be sure your reader is configured for the
correct interface before scanning this label.
Reset Default Settings
