Datalogic PowerScan D8530, Reference Manual, Page: 30 / 160

POWERSCAN® D8530
18
4.1 DEFAULT SETTINGS
Configuration Field Default Setting
RS-232 Communication
Baud Rate 115200
Parity, Data Bits, Stop Bits No parity; 8 Data bits; 1 Stop bit
Handshake None
ACK/NACK Protocol
None
FIFO Enabled
Intercharacter Delay
0
Intercode Delay 0
RX Timeout 10 seconds
Serial Trigger Lock Disabled
Serial Trigger Lock Disable Character NUL
Serial Trigger Lock Enable Character NUL
USB COM Emulation
Handshake None
ACK/NACK Protocol
None
FIFO Enabled
Intercharacter Delay
0
Intercode Delay 0
RX Timeout 10 seconds
USB Keyboard Emulation
FIFO Enabled
Intercharacter Delay
0
Intercode Delay 0
*Keyboard Nationality USA
*Keyboard Speed Normal
WEDGE-Communication
*Keyboard Nationality USA
CapsLock OFF
CapsLock Auto-Recognition
ON
NumLock OFF
Intercharacter Delay
0
Intercode Delay 0
Data Format-Symbology Independent Parameters
Code Identifier Disabled
Custom Code Identifier Disabled
Code Length Disabled
*Header No headers
*Terminator CR and LF terminators for RS-232, USB
BULK, USB COM, USB Generic HID
ENTER terminator for Wedge, USB Kbd
* The default values of these parameters are set when reading the interface selection.