Enter/Exit Programming Mode
266
PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR
Mode Selection
This feature allows the PowerScan 16K model to operate in one of two basic
operative modes:
• Normal Mode — data entered, either on the keypad or read via barcode,
is transmitted to the host once the enter key is pressed, following the
configured formatting.
• Quantity/Code Mode — Can be further configured. See the next sec-
tions for Qty/Code operations. .
Set Normal Mode
DEFAULT
Set QtylCode Mode
Quantity Field
This feature defines the behavior of the scanner if no data is entered in the
QTY field so that it is left empty. Options are:
• code is transmitted with default QTY (‘1’)
• code is transmitted alone (without any quantity information)
• code is discarded and an error beep is generated
Transmit code with default qty (1)
DEFAULT
Transmit Code only
Discard Code
Summary of Contents for PowerScan 9501-AR Series
