Datalogic Pegaso, Product Reference Manual, Page: 88 / 172

Falcon® Desktop Utility for Windows® CE
B-4 Pegaso™ Industrial PDA with Windows
®
CE
Setting a Password
To set a password:
1. Enter a password in the field. This allows the user to specify a password when this
utility is launched. By default there is no password set.
2. Re-enter the password in the second field.
3. Select/tap
Set Password
to enable the password.
4. Select/tap
OK
close the
Set Password Confirmation
dialog.
Changing a Password
To change to a new password:
1. Enter a new value in the
Enter Password
field.
2. Re-enter the new value in the
Re-enter Password
field.
3. Select/tap
Set Password
.
Removing a Password
To remove a password:
1. Enter blanks in both
Password
fields.
2. Select/tap
Set Password
.
Password Request Dialog Box
Once the password is set, the next time you open the
Falcon Desktop Utility
, the
FDU Pass-
word
dialog box opens.
This dialog box will only open if a password was defined.
Be sure to record the Password for future reference.
You must select/tap Set Password prior to exiting FDU in order to store and
activate your new password. It is not necessary to select Enable Falcon
Desktop .
CAUTION
If you select/tap Restore Defaults it will remove all custom settings and
restore all the factory default settings, except a previously set password.