Datalogic Pegaso Page 82 Product Reference Manual Download

Page: 82 / 172

Accessories

A-10

Pegaso™ Industrial PDA with Windows

Belt Clip

The Belt Clip comes with two separate pieces:
one that attaches to the Pegaso, and one that
attaches to your belt.

To install the Belt Clip on the unit, complete
the following steps:

1. Turn the Pegaso face-down and ensure

that power is off.

2. Orient the Belt Clip on the underside of

the Pegaso.

3. Align the “ears” on the inside of the Belt Clip with the corresponding holes on the

underside of the Pegaso and slide them into place.

4. Push the top of the Belt Clip against the Pegaso and turn the quarter-turn fastener

to secure it.

The Handstrap can be left on when installing the Belt Clip.

Ears

Summary of Contents for Pegaso













































































































































































Search results

Summary of Contents for Pegaso

Reviews:

Related manuals for Pegaso

Brands by name

Popular brands

Datalogic Pegaso, Product Reference Manual

Search results

Summary of Contents for Pegaso

Reviews:

Related manuals for Pegaso

Brands by name

Popular brands