Datalogic PD9330, Product Reference Manual

Page: 30 / 332

Setup
20 PowerScan™ PD9330/PBT9300/PM9300
Linking to a Bluetooth Adapter in HID mode
1. Install any drivers provided with the Bluetooth adapter.
2. Scan the
Link to PC in HID
label below.
3. Use the host computer’s Bluetooth manager to “Discover new devices”
and select "Datalogic Scanner." If you receive an error message, it may
be necessary to disable security on the device.
4. Use a text editor to see incoming data on the port designated by the
computer's Bluetooth manager.
Link to PC in HID
The Powerscan BT9500 can be set up to require a PIN code when connecting.
If you want to set up a PIN, or when adding new equipment to a system that
uses a custom security PIN, please see
"Bluetooth PIN Code"
starting on
page 214 for more information.
Power Off
Scan the bar code below to shut off power to the handheld until the next
trigger pull
. This function only applies to the wireless models.
Power Off