Datalogic MX-U81, Hardware Manual

Page: 7 / 66

1-1 Datalogic S.r.l.
C H A P T E R 1
When Your System Arrives
Thank you for purchasing a MX-U81 embedded machine vision system (MX-U81 Processor). Please read the instruc-
tions in this document before starting your system setup.
This manual explains the various parts of the MX-U81 system hardware, including the system inputs and outputs avail-
able to integrate your system into a production line.
When your system arrives, check the shipping cartons for wrinkled or damaged corners, holes through the cardboard, or
other signs of rough handling or abuse. If you find any signs of damage, ask the delivery service to make a note on the
delivery receipt describing the damage.
Carefully remove the system unit, cameras, cabling, and accessories from the shipping package. Place all equipment you
unpack on a table and inspect each item. Report any damage to the carrier immediately. Save all packing materials so you
can repack the shipment in case you need to move or ship it.
Temperature precautions: If your system arrives in very cold or hot weather, allow all the equipment to reach room tem-
perature before plugging it in. Exposing a cold device to a warm room causes condensation that could damage the system
if power is applied too soon. If condensation forms, wait for it to dry completely.
System Factory Setup
Before we shipped your MX-U81 vision system, we ran the installation and setup program and specified a default soft-
ware and hardware configuration. See page 1-4 for more information about setting up the hardware. Refer to the Impact
Reference Guide for software configuration information.
IMPORTANT NOTE:
A USB Hardware key is ordered and shipped separately from the processor. It must be present in the USB port labeled
USB5 on the processor front before the processor is powered on. (See “Front Panel Connections” on page 1-7.)
A USB Hardware key is ordered and
shipped separately from the processor.
It must be present in the USB port
labeled USB5 on the processor front
before the processor is powered on.
Processor Front View