manualshive.com logo in svg

Datalogic MEMOR 20, User Manual

Share
Download
Datalogic MEMOR 20 User Manual Download Page 84

CONTENTS

78

   MEMOR™ 20

WWAN CONNECTION

The Memor 20 enhances your connectivity solutions giving you an opening to an inter-
national wireless infrastructure that is the global standard. It is optimized for the follow-
ing two-way communications:   

•

Voice: GSM voice data (dial-up).

•

Data: Available speed depends on the wireless network carrier and their sup-
ported packet-data technology in addition to network conditions.

•

GSM: Quad Band (850/900/1800/1900 MHz).

The Memor 20 supports the following 3G bands:

•

EU (ROW): WCDMA: B1/2/5/8 (2100/1900/850/900).

•

US: WCDMA 2100/1900/1700/850/900.

The Memor 20 supports the following LTE bands:

•

EU (ROW) sku: FDD_LTE B1/3/5/7/8/20/28.

•

US sku: FDD_LTE B1/2/4/5/7/12/13/17/25/26/30.

In order to use a WWAN Connection you have to install a SIM Card (See "

Install the SIM

 

Card" on page 12

).

NOTE: You can use the WWAN radio for simultaneous voice and data com-
munication on a UMTS (3G) network only. On a GSM network, if you want to 
communicate over the phone (voice), you cannot send data. If you want to 
send data, you cannot use the voice capability.

NOTE: Area coverage and 3G performance may vary, due to environmental 
conditions, access point types or interference caused by other devices 
(microwave ovens, radio transmitters, etc.).

Summary of Contents for MEMOR 20









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands