Datalogic MEMOR 20 User Manual Download

Page: 81 / 104

CONTENTS

USER’S MANUAL

USB Dock Connection

1. Turn on the host computer.

2. Connect the single slot dock full to the power supply (available as an accessory, p/

n 94ACC0249).

3. Connect the single slot dock full to the host computer by means of a standard USB

Type-C cable.

4. Remove the cap from the pogo pins on the dock.

5. Remove the USB rubber cap from the Memor 20

6. Insert the USB/ethernet plug included in the Memor 20’s box and fasten it with

the two provided screws.

7. Turn on the Memor 20.

8. Insert the Memor 20 into the dock.

NOTE: Connection through the single slot dock full complies to USB 2.0
standard.

Host Computer

Memor 20

USB Type-C Cable

Power Supply

(P/N 94ACC0250)

Single Slot
Dock Full

Summary of Contents for MEMOR 20









































































































Search results

Summary of Contents for MEMOR 20

Reviews:

Related manuals for MEMOR 20

Brands by name

Popular brands

Datalogic MEMOR 20, User Manual

Search results

Summary of Contents for MEMOR 20

Reviews:

Related manuals for MEMOR 20

Brands by name

Popular brands