manualshive.com logo in svg

Datalogic MEMOR 20, User Manual

Share
Download
Datalogic MEMOR 20 User Manual Download Page 77

USER’S MANUAL   

71

TOOLS

USB ADB DRIVER

USB connection allows to read and write files on both the internal storage memory and

 

the external storage memory, but doesn’t allow to install applications.

Android Debug Bridge (ADB) is a command-line utility included with Google’s Android

 

SDK and you can use it to control your device over USB from a computer, copy files back 
and forth, install and uninstall apps and run shell commands.

SDK ADD-ON

SDK add-on is a library which extends the Android SDK and development tools.

For more information and instructions to install SDK Add-on, Android™ Studio and

 

Android SDK, visit the website 

https://datalogic.github.io/android/overview

. 

Install ADB Driver

1. Install Android SDK Manager (visit the website 

https://datalogic.github.io/

android/overview 

for further information).

2. Download and install the Google USB Driver (see 

https://developer.android.com

for further information).

3. In order to use ADB with your device connected over USB, you must enable USB

 

debugging in the device system settings. To enable Android 

Developer options

, go

 

to 

Settings

 > 

System 

>

 About phone 

and tap on the 

Build Number

 section 7

 

times. After the 7th tap, the Developer options will be unlocked and available. Go

 

back to 

Settings 

>

 System 

>

 Advanced 

and tap 

Developer options

.

 

Enable 

USB

 

debugging

:

NOTE: Before installing the Google USB Driver, ensure you have installed 
the Datalogic plug-in.

Summary of Contents for MEMOR 20









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands