ALTERNATIVE CONNECTIONS
160 MATRIX 120™
* When using the USB interface without Datalogic accessory cables, EMC compliance requires the
USB data and power signals originate from the same source (i.e.computer). Max USB cable
length from M12 17-pin connector is 2 meters.
Incorrect disconnection can result in dam-
age to the USB hub.
** Do not leave floating, see "
RS422 Full Duplex Interface" on page 57
for connection
details.
In order to meet EMC requirements:
•
connect the reader chassis to the plant earth ground by means of a flat copper
braid shorter than 100 mm;
•
connect your cable shield to the locking ring nut of the connector.
ON-BOARD ETHERNET CONNECTOR
A Standard M12 D-Coded female connector is provided for the on-board Ethernet con-
nection. This interface is IEEE 802.3 10 BaseT and IEEE 802.3u 100 BaseTx compliant.
Figure 2 - M12 D-Coded Female Ethernet Network Connector
1
TX+
Transmitted data +
2
RX+
Received data +
3
TX-
Transmitted data -
4
RX-
Received data -
RS232
RS422 Full-Duplex
17
Main Interface
(SW Selectable)
TX
TX+
11
RX
**RX+
12
-
TX-
10
-
**RX-
POWER, COM AND I/O CONNECTOR PINOUT
PIN
NAME
DESCRIPTION
ON-BOARD ETHERNET NETWORK CONNECTOR PINOUT
PIN
NAME
DESCRIPTION
Summary of Contents for Matrix 120
