Datalogic Magellan 3450VSi, Product Reference Manual

Page: 43 / 352

Host Download to Handheld Enter/Exit Programming Mode
Product Reference Guide 33
Host Download to Handheld
Attached Datalogic handheld scanners can be updated via the host port. Con-
tact Technical Support for details.
Handheld Host Download Timeout
This feature sets the timeout (in seconds) to wait for a response from the hand-
held when performing a host download to the handheld.
To set this feature:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the bar code below, Set Handheld HDL Timeout. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the scan-
ner reads only the bar code you intend to scan.
3. Scan the appropriate digits from the Alpha-Numeric Keypad in Appendix C
that represent the desired delay. The selectable range is 0-255, which is
the delay in 1-second increments. Pad all single and double digit numbers
with leading zeroes to yield a three-digit entry (000-255).
4. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
Examples:
002 = 2 seconds
005 = 5 seconds
015 = 15 seconds
04EF(CR)
Set Handheld HDL Timeout
DEFAULT
Default setting for this feature is: 15 seconds