Datalogic Magellan 3450VSi, Product Reference Manual, Page: 344 / 352

Handheld Data Format Requirements General
334 Magellan™ 3450VSi
Code 39
• Check character must be included in label data.
• Label length including start, stop and check characters and excluding pre-
fix character must meet requirements imposed by the main scanner's fixed
or variable label length control for this symbology type.
• Start and stop characters "*" must be included in label.
• Prefix must be an ASCII character '*'.
• Example : '**Code 39.TEST*'.
Code 39-Pharmacode
• Check character must be included in label data.
• Label length including start, stop and check characters and excluding pre-
fix character must meet requirements imposed by the main scanner's fixed
or variable label length control for this symbology type.
• Start and stop characters "*" must be included in label.
• Prefix must be an ASCII character 'p'.
• Example: 'p*123456789*'.
I 2 of 5
• Check character must be included in label data.
• Label length including check characters and excluding prefix character
must meet requirements imposed by the main scanner's fixed or variable
label length control for this symbology type.
• Prefix must be an ASCII character 'i'.
• Example: 'i0123456789'.
Codabar
• Check character must be included in label data.
• Label length including check character and excluding prefix character
must meet requirements imposed by the main scanner's fixed or variable
label length control for this symbology type.
• Prefix must be an ASCII character '%'.
• Start stop character sets must meet the matching requirement set forth by
the scanner configuration item
Start/Stop Character Match
.
• Start stop character sets must be of the form ABCD/ABCD and must be
included in the label.
• Example: '%s$99.95s' (the lower case ‘s’ at each end of the example is a
placeholder for the start stop character set).
Code 128
• Prefix must be an ASCII character '#'.
• Label length excluding prefix character or function code 3 for Code 128
programming labels must meet requirements imposed by the main scan-
ner's fixed or variable label length control for this symbology type.
• Function characters may be transmitted as a hexadecimal value 8x. Where
x correlates to function characters 1 thru 4 as follows:
• x80 = function code 1
• x81 = function code 2