Datalogic Magellan 3450VSi Page 175 Product Reference Manual Download

Page: 175 / 352

GTIN Enable

Enter/Exit Programming Mode

Product Reference Guide

165

GTIN

GTIN Enable

Enables/Disables the ability to convert UPCE, UPCA, EAN8, and EAN13 labels

into the GTIN 14-character format.

NOTE

If add-on information is present on the base label prior to the
conversion taking place, the add-on information will be appended

to the converted GTIN bar code.

To set this feature:

1. Scan the Enter/Exit Programming Mode bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover any

unused bar codes on this and the facing page to ensure that the scanner

reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the Enter/Exit Pro-

gramming Mode bar code.

DEFAULT

051500(CR)

GTIN = Disable

051501(CR)

GTIN = Enable

Summary of Contents for Magellan 3450VSi

































































































































































































































































































































































Search results

Summary of Contents for Magellan 3450VSi

Reviews:

Related manuals for Magellan 3450VSi

Brands by name

Popular brands

Datalogic Magellan 3450VSi, Product Reference Manual

Search results

Summary of Contents for Magellan 3450VSi

Reviews:

Related manuals for Magellan 3450VSi

Brands by name

Popular brands