Datalogic Magellan 3300HSi, Product Reference Manual

Page: 131 / 216

Product Reference Guide 123
Codabar (continued)
Length Control
Fixed Length Decoding —
When fixed length decoding is enabled, the scanner will
decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding —
When variable length decoding is enabled, the scanner
will decode a bar code if the label length falls in the range of the configurable
Length 1 and Length 2 values.
Codabar Length 1, Length 2 Programming Instructions
See Length 1, Length 2 Programming Instructions on page 158 for detailed
instructions on setting this feature.
START / END
PROGRAMMING bar codes
Variable Length Decoding
DEFAULT
Fixed Length Decoding
NOTE
For Codabar bar codes, all start, stop,
check and data characters are included
in the length calculations.
START / END
PROGRAMMING bar codes
DEFAULT SETTING FOR THIS FEATURE: 03
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 50