Datalogic MAGELLAN 3200VSI, Reference Manual

Page: 198 / 206

190 Magellan™ 3200VSI
Codabar
• Check character must be included in label data.
• Label length including check character and excluding prefix character
must meet requirements imposed by the main scanner's fixed or variable
label length control for this symbology type.
• Prefix must be an ASCII character '%'.
• Start stop character sets must meet the matching requirement set forth by
the scanner configuration item
Start/Stop Character Match
.
• Start stop character sets must be of the form ABCD/ABCD and must be
included in the label.
• Example: '%s$99.95s' (the lower case ‘s’ at each end of the example is a
placeholder for the start stop character set).
Code 128
• Prefix must be an ASCII character '#'.
• Label length excluding prefix character or function code 3 for Code 128
programming labels must meet requirements imposed by the main scan-
ner's fixed or variable label length control for this symbology type.
• Function characters may be transmitted as a hexadecimal value 8x. Where
x correlates to function characters 1 thru 4 as follows:
• x80 = function code 1
• x81 = function code 2
• x82 = function code 3
• x83 = function code 4
• For Code 128 programming labels the format is of the general form '#/
82nnnnn/r ' - /82 is hexadecimal 82 and /r is carriage return.
• Example: '#Code_128.Test'.