Datalogic MAGELLAN 3200VSI, Reference Manual

Page: 159 / 206

Product Reference Guide 151
LED and Beeper Indicators
The scanner’s beeper sounds and its green LED illuminates to indicate various
functions or errors on the scanner. The tables below list these indications. The
scanner’s functions are programmable, and so may or may not be turned on.
For example, certain indications, such as the power-up beep can be disabled
using programming bar code labels.
Table 1. LED Indications
LED
INDICATION
INDICATION COMMENT
Power-on

indication
Bright green flash
Indicates the scanner has finished all its power up tests
and is now ready for operation.
Good Read

Indication
Bright green flash Indicates a bar code has been read and decoded.
Scanner Ready Constant dim green
The scanner is ready for operation. The LED is also configu-
rable to off when idle and ready for operation
Sleep Mode
Green LED slowly and continu-
ously changes from off to dim to
off.
The scanner is in Sleep Mode. To wake the scanner up,
move an object in front of its window or press the button
atop the unit. This indication is configurable and may be
programmed to behave differently.
Host Disable
Constant green flash at 1 Hz
(100mS on, 900mS off) The scanner is disabled due to receiving a disable command
from the POS terminal.
Diagnostics
Varies (see Error Codes on page 4
for more information) The LED can provide diagnostic feedback if the scanner dis-
covers a problem during SelfTest.
Prog. Mode See Host Disable above. The scanner is in Programming Mode.