Datalogic MAGELLAN 3200VSI, Reference Manual

Page: 136 / 206

Enter/Exit Programming Mode Micro PDF 417
128 Magellan™ 3200VSI
Micro PDF 417 Length Control
Fixed Length Decoding —
When fixed length decoding is enabled, the scanner
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding —
When variable length decoding is enabled, the scan-
ner will decode a bar code if the label length falls in the range of the configu-
rable Length 1 and Length 2 values.
Configuring Fixed Length Decoding:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the Fixed Length Decoding bar code.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
4. Set Length 1 to the first fixed length by following the Length 1, Length 2
Programming Instructions below.
5. Set Length 2 to the second fixed length (or to ‘0000’ if there is only one
fixed length) by following the Micro PDF 417 Length 1, Length 2 Program-
ming Instructions below.
Configuring Variable Length Decoding:
1. Scan the Enter/Exit Programming Mode bar code.
2. Scan the Variable Length Decoding bar code.
3. Complete the programming sequence by scanning the Enter/Exit Pro-
gramming Mode bar code.
4. Set Length 1 to the minimum length by following the Micro PDF 417
Length 1, Length 2 Programming Instructions below.
5. Set Length 2 to the maximum length by following the Micro PDF 417
Length 1, Length 2 Programming Instructions below.
Variable Length Decoding
DEFAULT
Fixed Length Decoding