Datalogic MAGELLAN 3200VSI, Reference Manual

Page: 118 / 206

Enter/Exit Programming Mode Code 128
110 Magellan™ 3200VSI
Transmit Function Characters
Enables/disables transmission of Code 128 function characters 1, 2, 3, and 4. 
Function codes are transmitted as follows:
• FNC1 = 80 hex
• FNC2 = 81 hex
• FNC3 = 82 hex
• FNC4 = 83 hex
Don’t Transmit Function Characters
DEFAULT
Transmit Function Characters
Length Control
Fixed Length Decoding —
When fixed length decoding is enabled, the scanner
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding —
When variable length decoding is enabled, the scan-
ner will decode a bar code if the label length falls in the range of the configu-
rable Length 1 and Length 2 values.
Variable Length Decoding
DEFAULT
Fixed Length Decoding