Datalogic Magellan 1500i, Product Reference Manual

Page: 188 / 346

ENTER/EXIT PROGRAMMING MODE
178
MAGELLAN™ 1500I
GTIN
GTIN Enable
Enables/Disables the ability to convert UPCE, UPCA, EAN8, and EAN13 labels into the GTIN
14 ‐ character format.
NOTE
If add-on information is present on the base label prior to the
conversion taking place, the add-on information will be appended
to the converted GTIN barcode.
To set this feature:
1. Scan the Enter/Exit Programming Mode barcode at the top of the page.
2. Scan either the enable or disable barcode below. You’ll need to cover any unused bar ‐
codes on this and the facing page to ensure that the scanner reads only the barcode
you intend to scan.
3. Complete the programming sequence by scanning the Enter/Exit Programming Mode
barcode.
051500(CR)
GTIN = Disable
051501(CR)
GTIN = Enable
DEFAULT