manualshive.com logo in svg

Datalogic Joya, User Manual

Share
Download
Datalogic Joya User Manual Download Page 8

Introduction

2

JOYA™  TOUCH

Product Presentation

The Datalogic JOYA TOUCH is a pocket-sized Windows embedded
compact 7 powered mobile computer, available in two form factors.
This compact, lightweight, and versatile device, combines fully
integrated automatic data capture (2D bar code), a wireless charging
system and wireless communication capabilities, supporting nearly
any application.

The Datalogic JOYA TOUCH system architecture is based on the blend
of Intel X-Scale series processors coupled with the Windows
Embedded Compact operating system and it was developed to meet
the most demanding customer needs.

A huge quantity of on-board memory is available. It enables the user
to adapt the terminal for any specific need.

Thanks to its great ergonomics and the state of the art architecture,
the Datalogic   JOYA   TOUCH   is   the   right   answer   to   enhance
your   business opportunities.

Summary of Contents for Joya























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands