manualshive.com logo in svg

Datalogic Jota A6 Touch, User Manual

Share
Download
Datalogic Jota A6 Touch User Manual Download Page 28

Battery

20

JOYA™ TOUCH A6

Charge with the 3-Slot Cradle

There are two options to connect the cradle to the power supply: fast
charge and standard charge.

Fast Charge

The fast charge connection allows to power one cradle with one
power supply. 

Plug the power supply cable into the power connector on the back of
the cradle, then plug the power supply into the AC/DC plug using a
Datalogic power cable. 

Please see below an example of how to insert the power supply cable
through the wall mounting metal bracket:

Standard Charge

The standard charge connection allows to power two cradles with
one power supply. To connect a second cradle use the Joya Touch
Cradle Power Jumper, available as optional accessory (P/N
91ACC0049).

1. Connect the first cradle to the second cradle using the power

jumper.

2. Connect the power supply to the first cradle.

High Visibility

High Density

Summary of Contents for Jota A6 Touch



























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands