Datalogic Jota A6 Touch, User Manual

Page: 148 / 282

Datalogic Applications
140 JOYA™ TOUCH A6
Version
This page displays the DXU Agent version number.
DXU Application Controls
Available Device List and Configuration
The Available Devices list displays devices which are either currently
connected, have been connected since launching DXU, or were
manually connected at some time in the past. You can refresh the
view to automatically show devices or hide devices which connect
while you work on another device. In general, they should appear
automatically as they connect.
By default, No Devices Available will display when no devices
announce themselves to DXU either when they connect via USB or
when they connect over a network. Simply connecting the Joya Touch
A6 to a network, even on the same subnet as the PC running DXU,
will not automatically display as being available. The device must try
to connect to DXU, which sends an announcement packet to DXU.
This can be done by scanning Scan2Deploy barcode labels. However,
connecting a device to the PC running DXU via USB will automatically
display it in DXU. You may also select the
Enable Automatic
Discovery of Devices check box in DXU’s Settings view to
automatically see any device that connects to the network, but