DATALOGIC J SERIES™
2
2.3 WPAN
CONNECTION
Datalogic J Series™ PDAs can communicate with a Bluetooth
®
device, such as a
printer, within a range of 10 m, using the on-board Bluetooth
®
module.
A
B
Key:
A) Datalogic J Series™ PDA
B) Bluetooth®
printer
NOTE
In order to avoid wasting energy, the Bluetooth® module is off by
default. If you need to have Bluetooth® working, the module must be
powered on using the Wireless Communications applet (see par.
3.8.4), and perform the Discovery procedure (see par. 3.9.2).
The Blue LED flashing signals that the Bluetooth® module is on.
NOTE
Suspending the terminal powers off the Bluetooth® radio and drops
the piconet (Bluetooth® connection). When the terminal resumes, it
takes approximately 10 seconds for the Bluetooth® radio driver to re-
initialize the radio.
14