Datalogic Heron HD3430, Product Reference Manual

Page: 25 / 310

Customizing Configuration Settings
Product Reference Guide 17
Interface Settings
The scanner is typically factory-configured with a set of default features stan-
dard to the interface type you ordered. See "Interface Selection" on page 13.
Global Interface Features, starting on page 21 provides settings configurable by all
interface types. If your installation requires you to further customize your scan-
ner, you can select other options through use of the instructions and program-
ming bar codes available in the appropriate section for your interface.
• RS-232 ONLY Interface, starting on page 23
• RS-232/USB-COM Interfaces, starting on page 29
• Keyboard Interface, starting on page 39
• USB-OEM Interface, starting on page 71
Configuring Other Features
If your installation requires different programming than the standard factory
default settings, the following sections of this manual allow configuration of
non-interface-specific settings you might require:
Configuration Using Bar Codes
:
General Features includes programming for scan-
ning, speaker and LED indicators and other such universal settings.
Reading Parameters
:
Reading Parameters include programming for scanning,
speaker and LED indicators and other universal settings.
1D Symbologies
:
Includes options concerning the bar code label types (symbolo-
gies). These settings allow you to enable/disable symbologies, set label
lengths, require check digit, etc.
Software Version Transmission
The software version of the device can be transmitted over the RS-232, Key-
board and USB interfaces by scanning the following label.
Transmit Software Version
RevA