4
ABOUT THESE OPERATING INSTRUCTIONS
This user manual contains a system overview, technical data about the Hardware and Wearables, detailed step-by-step
instructions for using HandScanner system and information about configuration settings and troubleshooting.
It is intended for process planners, configurators and maintenance technicians who are using HandScanner system for
the first time. It is designed so that HandScanner system can be used safely without prior knowledge.
Read carefully before use and keep for future reference.
EXPLANATION OF SYMBOLS
A warning notice is used in these instructions. Always read and observe this warning notice. The warning notice is
introduced with the word
CAUTION
and means the following:
CAUTION
Slight bodily injury or danger of physical damage to HandScanner system is possible.
In addition, other symbols are used with the following meanings:
NOTE
Additional notices provide more information about the respective chapter.
TIP
Additional tips facilitate the implementation of a certain procedure.
RESULT
The result will show the outcome of the prior action.
SAFETY INSTRUCTIONS
CAUTION
Keep all cables and wires away from high voltage sources! This may otherwise lead to damage or faults due
to overvoltage, line noise, electrostatic discharge or other irregularities.
Hardware
CAUTION
Do not use damaged cables! Otherwise the safe functioning of HandScanner system cannot be ensured.
CAUTION
Do not unscrew the Hardware housing! This may otherwise lead to HandScanner system not functioning pro-
perly.
CAUTION
Do not replace the battery of the HandScanner! This may otherwise lead to HandScanner not functioning
properly.
CAUTION
Do not modify HandScanner system! This may otherwise lead to HandScanner system not functioning pro-
perly.
CAUTION
Do not stare directly into beam! Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure. Class 2 laser HandScanners use a low power,
visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly
into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful.
Wearables
CAUTION
Keep Wearables away from moving machine parts and do not use without a HandScanner! Otherwise the
Wearables may get stuck on objects.
CAUTION
Use Wearables in the right size! Otherwise this may cause pain or pressure points on your hand.
