Datalogic Gryphon I GPS4400, Product Reference Manual

Page: 85 / 316

Reading Parameters Enter/Exit Programming Mode
Product Reference Guide 75
Mobile Bias
This variable mode alters scan module operation, optimizing barcode scan-
ning for reading from mobile device displays rather than standard labels.
The range for this setting is from 0 to 255.
DEFAULT
$CSILF00\r
No Mobile Bias
$CSILF
Set Mobile Bias
To configure, scan the ENTER/EXIT PROGRAMMING
MODE bar code above, then the bar code at left fol-
lowed by the digits from the Alphanumeric characters
in
Appendix D, Keypad
representing your desired
character(s). End by scanning the ENTER/EXIT bar
code.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
~
CANCEL
Partial Label Reading Control
Enable/Disable the option to ignore partial labels to be read within the
boundary of the field of view.
IPPL00
Partial Label Reading Control = Disable
DEFAULT
IPPL01
Partial Label Reading Control = Enable