Datalogic Gryphon I GPS4400, Product Reference Manual

Page: 69 / 316

Data Format Enter/Exit Programming Mode
Product Reference Guide 59
Case Conversion
This feature allows conversion of the case of all alphabetic characters to
upper or lower case.
DEFAULT
$CLFCA00(CR)
Case Conversion = Disable (no case conversion)
$CLFCA01(CR)
Case Conversion = Convert to upper case
$CLFCA02(CR)
Case Conversion = Convert to lower case
Case conversion affects ONLY scanned bar code data, and does not affect
Label ID, Prefix, Suffix, or other appended data.
Character Conversion
Character conversion is an eight byte configuration item. The eight bytes
are 4 character pairs represented in hexadecimal ASCII values. The first
character in the pair is the character that will be converted. The second
character in the pair is the character to convert to. If the character to con-
vert in a pair is FF, then no conversion is done.
$CLFCH
Configure Character Conversion
DEFAULT
0xFFFFFFFFFFFFFFFF
(No character conversion)
If less than the expected string of 16 characters are selected, scan the
ENTER/EXIT bar code twice to accept the selections and exit Programming
Mode.