Technical Specifications
Product Reference Guide
267
Programming Mode :
The following indications ONLY occur when the reader is
in Programming Mode
.
Indicator
Description
LED
Beeper
Label Programming
Mode Entry
A valid programming label
has been scanned.
LED blinks continu-
ously
Reader sounds four
low frequency beeps.
Label Programming
Mode Rejection of
Label
A label has been rejected.
N/A
Reader sounds three
times at lowest fre-
quency and current
volume.
Label Programming
Mode Acceptance of
Partial Label
In cases where multiple
labels must be scanned to
program one feature, this
indication acknowledges
each portion as it is suc-
cessfully scanned.
N/A
Reader sounds one
short beep at highest
frequency and cur-
rent volume.
Label Programming
Mode Acceptance of
Programming
Configuration option(s)
have been successfully
programmed via labels and
the reader has exited Pro-
gramming Mode.
N/A
Reader sounds one
high frequency beep
and 4 low frequency
beeps followed by
reset beeps.
Label Programming
Mode Cancel Item
Entry
Cancel label has been
scanned.
N/A
Reader sounds two
times at low fre-
quency and current
volume.
ROM Failure
There is an error in the
reader's software/pro-
gramming
Flashes
Reader sounds one
error beep at highest
volume.
Limited Scanning
Label Read
Indicates that a host
connection is not estab-
lished.
N/A
Reader 'chirps' six
times at the highest
frequency and current
volume.
Reader Active Mode
The reader is active and
ready to scan.
The LED is lit steadily
a
N/A
Reader
Disabled
The reader has been
disabled by the host.
The LED blinks contin-
uously
N/A
Green Spot
a
flashes
momentarily
Upon successful read of
a label, the software
shall turn the green
spot on for the time
specified by the config-
ured value.
N/A
N/A
Image Capture
On when ready to cap-
ture image
LED on
N/A
Flash Memory
Update
Occurs while update is
in progress
LED blinks
a
Except when in sleep mode or when a Good Read LED Duration other than 00 is selected
Indicator
Description
LED
Beeper
Summary of Contents for Gryphon I GPS4400
