Datalogic Gryphon I GPS4400, Product Reference Manual

Page: 205 / 316

2D Symbologies Enter/Exit Programming Mode
Product Reference Guide 195
QR Code Set Length 2
This feature specifies one of the bar code lengths for
QR Code Length Control
.
Length 2 is the maximum label length if in Variable Length Mode, or the
second fixed length if in Fixed Length Mode. Characters can be set from
0001 to 7,089 characters in increments of 0001 (pad with zeros).
See
page 241
for detailed instructions on setting this feature.
$CQRL2
Select QR Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad
representing your
desired character(s). End by scanning the ENTER/EXIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
~
CANCEL
DEFAULT
Length 2 is 7,089 Characters