Datalogic Gryphon I GPS4400, Product Reference Manual

Page: 186 / 316

Enter/Exit Programming Mode 2D Symbologies
176 Gryphon™ GPS4400
Aztec Code Set Length 1
Specifies one of the bar code lengths for
Aztec Code Length Control
. Length 1
is the minimum label length if in
Variable Length
Mode, or the first fixed
length if in Fixed Length Mode. Characters can be set from 0001 to 3,832
characters in increments of 0001 (pad with zeros).
See
page 241
for detailed instructions on setting this feature.
$CAZL1
Select Aztec Code Length 1 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad
representing your
desired character(s). End by scanning the ENTER/EXIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
~
CANCEL
DEFAULT
0001 = Length 1 is 1 Character