Datalogic Gryphon I GPS4400, Product Reference Manual

Page: 165 / 316

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 155
GS1 DataBar™ Expanded Set Length 2
This feature specifies one of the bar code lengths for
GS1 DataBar™ Expanded
Length Control
. Length 2 is the maximum label length if in
Variable Length
Mode, or the second fixed length if in
Fixed Length
Mode. Length includes
the bar code’s data characters only. The length can be set from 1 to 74
characters. A setting of 0 specifies to ignore this length (only one fixed
length).
Table 18
provides examples for setting Length 2. See
page 241
for detailed
instructions on setting this feature.
Table 18. GS1 DataBar™ Expanded Length 2 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
00 (ignore second
length)
07 Characters 52 Characters 74 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT GS1 DataBar™ EXPANDED LENGTH 2 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘0’ ‘0’ and ‘7’ ‘5’ and ‘2’ ‘7’ and ‘4’
5 Scan ENTER/EXIT PROGRAMMING MODE
$CXBL2
Select GS1 DataBar™ Expanded Set Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
~
CANCEL
DEFAULT
74 = Length 2 is 74 Characters