Datalogic Gryphon I GPS4400, Product Reference Manual

Page: 151 / 316

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 141
Codabar Set Length 1
This feature specifies one of the bar code lengths for
Codabar Length Control
-
Codabar Length Control
. Length 1 is the minimum label length if in
Variable
Length
Mode, or the first fixed length if in
Fixed Length
Mode. Length
includes the bar code’s start, stop, check and data characters. The length
must include at least one data character. The length can be set from 3 to 50
characters.
Table 13
provides some examples for setting Length 1. See
page 241
for
detailed instructions on setting this feature.
Table 13. Codabar Length 1 Setting Examples
STEP ACTION EXAMPLES
1
Desired Setting (and pad
with leading zeros)
03 Characters 09 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODABAR LENGTH 1 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘3’ ‘0’ and ‘9’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
$CCBL1
Select Codabar Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
~
CANCEL
DEFAULT
03 = Length 1 is 3 Characters