Datalogic Gryphon I GD4400, Product Reference Manual, Page: 87 / 350

Enter/Exit Programming Mode
Product Reference Guide 85
Wand Idle State
This feature specifies the level of the Wand output signal when the reader is
idle.
$CWAID00(CR)
Wand Idle State = Low
$CWAID01(CR)
Wand Idle State = High
DEFAULT
TTL logic levels:

0V <= Low <= 0.7V

2.4V <= High <= 5.25V
Transmit Noise
This option specifies the leading/trailing noise for the Wand interface.
DEFAULT
$CWATN00(CR)
Transmit Noise = Disable
$CWATN01(CR)
Transmit Noise = Transmit leading noise
$CWATN02(CR)
Transmit Noise = Transmit trailing noise
$CWATN03(CR)
Transmit Noise = Transmit leading and trailing noise