Datalogic Gryphon I GD4132, Product Reference Manual, Page: 51 / 354

ENTER/EXIT PROGRAMMING MODE
Product Reference Guide 49
Intercharacter Delay
This parameter specifies the intercharacter de
lay be
tween the end of one char-
acter and the beginning of the next. The delay can be set within a range of zero
(0) to 990 milliseconds in 10ms increments. A setting of zero specifies no
delay.
See
page 284 for more information.
Intercharacter Delay = No Delay
Select Intercharacter Delay Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the begin-
ning.
CANCEL
DEFAULT
00 = No Intercharacter Delay