Linking the Reader
Quick Reference Guide
19
Linking the Reader
Link Datalogic RF Devices to Base
For RF devices, before configuring the interface it is necessary
to link the handheld with the base.
To link the handheld and the base, either press the trigger to
wake it, or simply mount into the base to wake up for opera-
tion. If the reader was previously linked to another base, you
must first scan the
Unlink
bar code before re-linking to the new
base.
Link Scanner to Bluetooth Adapter
1.
Install any drivers provided with the Bluetooth
adapter.
2.
Scan the
Enable RF Link to Server
label below to make the
scanner visible to the host computer.
3.
Use the host computer’s Bluetooth manager to “Dis-
cover new devices” and select "Datalogic Scanner." If
you receive an error message, it may be necessary to
disable security on the device.
4.
Use an RS-232 terminal program to see incoming
data on the port designated by the computer's Blue-
tooth manager.
The Gryphon I GBT4400 can be set up to require a PIN code
when connecting. If you want to set up a PIN, or when add-
ing new equipment to a system that uses a custom security
PIN, please see the PRG for information.
Unlink
Enable RF Link to Server
