Reading Parameters
Enter/Exit Programming Mode
Product Reference Guide
99
Stand Operation
Specifies the behavior of the reader when stationary in a stand.
There are two conditions which cause the reader to switch to Stand Mode:
1. The reader is configured to switch to Stand Mode when stationary.
2. The reader is placed into the cradle of the base station.
Below are further options concerning Stand Operation.
Ignore Autorecognition.
Disables mode switching when the reader is placed in a stand.
Switch to Stand Mode.
Automatically switches the reader to Stand Mode when the reader is
placed in the stand.
Switch to Flashing.
Automatically switches the reader to Flash Mode when the reader is placed
in the stand.
Switch to Always On.
Automatically switches the reader to Always On mode when the reader is
placed in the stand
.
Do Not Change Mode
Change to Stand Mode
Change to Always On
Change to Flashing
$CSMSD00(
CR)
$CSMSD01(
CR)
DEFAULT
$CSMSD02(CR)
$CSMSD03(CR)
Summary of Contents for Gryphon I GBT4400
Page 42: ...Enter Exit Programming Mode Global Interface Features 40 Gryphon I GD44XX GBT4400 GM440X NOTES...
Page 56: ...Enter Exit Programming Mode RS 232 USB Com Interfaces 54 Gryphon I GD44XX GBT4400 GM440X NOTES...
Page 234: ...232 Gryphon I GD44XX GBT4400 GM440X NOTES...
Page 320: ...318 Gryphon I GD44XX GBT4400 GM440X A B C D E F...
