manualshive.com logo in svg

Datalogic Gryphon GD4200, Product Reference Manual

Share
Download
Datalogic Gryphon GD4200 Product Reference Manual Download Page 139

UPC/EAN GLOBAL SETTINGS

ENTER/EXIT PROGRAMMING MODE

PRODUCT REFERENCE GUIDE   

125

Optional Add-ons

The scanner can be enabled to optionally read the following add-ons (supplementals):

•

P2

•

P5

NOTE: If a UPC/EAN base label and a an add-on are both decoded, the scan-
ner will transmit the base label and add-on. If a UPC/EAN base label is 
decoded without an add-on, the base label will be transmitted without an 
add-on.

Conditional add-on settings (if enabled) are considered by the scanner 
before optional add-on settings.

$CADO200

Optional Add-Ons = Disable P2

Optional Add-Ons = Enable P2

$CADO201

$CADO500

Optional Add-Ons = Disable P5

Optional Add-Ons = Enable P5

$CADO501

Summary of Contents for Gryphon GD4200

















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands