Datalogic Gryphon D432, Quick Reference

Page: 10 / 31

DATALOGIC
INDICATORS
LED INDICATORS
The Gryphon™ D432/D432E has one green LED indicator signaling the
following reader functions:
STATUS BEHAVIOR
Power ON The LED lights up for 2 seconds to signal
the power supply is present.
Power ON with USB (without
external power supply) The LED blinks until the Host accepts the
device.
Normal Function The LED lights up after a good decoding
and will switch off only at the next trigger
press.
BEEPER
The Gryphon™ D432/D432E basic software provides beeper signals for
good/wrong reading and for indicating errors. Its tone, volume and duration can
be directly configured by using the codes given in the Gryphon™ D432/D432E
Reference Manual available on the website.
The application program can also manage the beeper (User Defined Beeper)
when the reader is controlled by a Host PC. It is possible to activate the beeper
by sending a command from the Host to the reader via the current
communication interface.
GOOD READ SPOT
It is possible to enable a green good-read spot, which will be projected in the
field of view when the reading is successful.
SETUP
1. Make connections between Gryphon™ D432/D432E and the Host PC
using the correct interface calbe.
2.
Read the correct Interface Selection code.
Your reader is now ready to read codes using the default settings.
4