Datalogic Gryphon BT4102, Product Reference Manual

Page: 17 / 354

Programming the Reader
Product Reference Guide 15
Programming the Reader
Configuration Methods
Programming Barcodes
The reader is factory-configured with a standard set of default features. After
scanning the interface barcode, you can select other options and customize
your reader through use of the instructions and programming barcode labels
available in the corresponding features section for your interface. Customizable
settings for many features are found in "Configuration Using Barcodes" starting
on page 39.
Some programming labels, like
"Restore Custom Defaults" on page 35, require
only the scan of the single label to enact the change. Most, however, require the
reader to be placed in Programming Mode prior to scanning them. Scan an
ENTER/EXIT barcode once to enter Programming Mode. Once the reader is in
Programming Mode, scan a number of parameter settings before scanning the
ENTER/EXIT barcode a second time, which will then accept your changes, exit
Programming Mode and return the reader to normal operation.
There are some exceptions to the typical programming sequence
described above. Please read the description and setting instructions
carefully when configuring each programmable feature.
Datalogic Aladdin™
Datalogic Aladdin™ is a multi-platform utility program providing a quick and
user-friendly configuration method via the RS-232/USB-COM interface. Alad-
din is available on the CD-ROM provided with your product, and also from the
Datalogic website. Aladdin allows you to program the reader by selecting con-
figuration commands through a user-friendly graphical interface running on a
PC. These commands are sent to the reader over the selected communication
interface, or they can be printed as barcodes to be scanned.
Aladdin also provides the ability to perform a software upgrade for the con-
nected device (see the Datalogic Aladdin™ Help On-Line for more details).