BLUETOOTH PASSKEY OR PIN CODE ENTRY REQUEST
PRODUCT REFERENCE GUIDE
25
BLUETOOTH PASSKEY OR PIN CODE ENTRY REQUEST
During the pairing process, based on Host and Reader security settings, you may need to
enter a Bluetooth passkey or PIN code.
When requested by the Host, simply enter the displayed code by scanning the corre
-
sponding bar codes for alphanumeric entry listed in
. Complete by scanning
the End label. To restart the entering of the passkey, read the Restart label.
Passkey END
Passkey Restart
POWER OFF
Scan the bar code below to shut off power to the handheld until the next trigger pull.
Power Off
NOTE: The Gryphon I GBT
4500
can be set up to authenticate the remote
system when connecting, by entering a Bluetooth passkey or a PIN code. If
you want to set the security level and authentication options suitable for
your application, or when adding new equipment to a system that requires
authentication or uses a custom security PIN, please see the
.
