Datalogic falon X3+ User Manual Download Page 90

Page: 90 / 162

FALCON™ X3+

4.8.2

Installing DFU on the Host PC

The Datalogic Firmware Utility (DFU) provides administrators with a f ield upgrade

mechanism. You must have Microsoft® ActiveSync (for Windows XP devices) or

Windows Mobile® Device Center (for Windows 7 and Vista devices) already loaded

and running on t he host PC to use DFU. Refer to par. 4.7.1 for more information

about Windows Mobile® Device Center.

Prior to installing, you must remove any previous versions of DFU
installed on the host PC.

NOTE

To install the Datalogic Firmware Utility, complete the following steps on the PC:

Go to the Datalogic website and download the most current version of the

Datalogic Firmware Utility. Unzip the file, then double-click to run

DFU_Setup.

exe

Click OK to continue once you have removed previous versions of DFU.

The Welcome to DFU Setup Program screen opens.

−

Please exit all Windows applications before running this installer.

−

Click Next to continue the Setup.

Follow the onscreen instructions to complete the installation.

Summary of Contents for falon X3+



































































































































































Search results

Summary of Contents for falon X3+

Reviews:

Related manuals for falon X3+

Brands by name

Popular brands

Datalogic falon X3+, User Manual

Search results

Summary of Contents for falon X3+

Reviews:

Related manuals for falon X3+

Brands by name

Popular brands